weld head for orbital welding
power supply for orbital weldingGuide ring for orbital welding

TIP TIG Orbital Welding

TIP TIG orbital welding equipment with TIP TIG wire feed technology for a wide range of applications.

Category:

Description

TIG orbital welding equipment with TIP TIG wire feed technology for a wide range of applications. TIP TIG offers a large selection of pipe weld heads, power supplies, and turn-key welding systems. High precision and rugged weld heads for small or large diameter applications produce quality welds and increase productivity. The weld heads can be configured in many different ways to meet the challenges of the job. With our track, we can offer also a full turn-key solution for straight line welding.

Features

  • TIG cold wire and hot wire welding with dynamic wire feed system
  • TIP TIG for Speed
  • Dynamic wire feeding for a controllable weld pool even with positional welding: The wire feeding is superimposed in parallel using a sinusoidal movement
  • Up to 300 % faster welding speeds compared to TIG welding
  • Up to 400 % improvement in deposition rate
  • Dilution reduced by up to 80 %
  • High process reliability and reproducible welding results
  • Higher welding speed and easy handling
  • Heat supply to the wire for improved deposition rate and an even lower risk of weld errors
  • Perfect weld appearance, no weld spatters
  • Compact Design: The most compact system providing more welding capacity than any other orbital welding system
  • Quick Setup: All components are pre-installed, proofed and test-welded
  • Wide range of TIP TIG GTAW torches
  • Remote diagnostics, operation, monitoring and maintenance via network or internet connection
  • Manual override on all weld parameters
  • AVC – Arc Voltage Control
  • Comprehensive data logging
  • Actual values with real-time feedback
  • Multi-language and units toggling
  • Semi-automated calibration

Application Range

  • Multi-pass orbital GTAW pipe-to-pipe
  • Multi-pass orbital GTAW pipe-to-fitting
  • ID and OD welding on larger tanks, vessels and ductwork (standard 2m / 6.5’ track sections bolt together for longer lengths)

Technical Data

  • Pipe (tube) size range: 4“ to 60“ (101.6mm – 1524mm)
  • Filler wire size: 0.8, 0.9, 1.0, 1.2 mm (.030“, .035“, .040“, .045“)
  • Output power 0-500 amps (power source dependant)
  • Input power 350 to 480 VAC, 50/60Hz

Product video

Copyright © 1997-2023 Ing. Siegfried Plasch. All rights reserved
Compact Cladding Cellweld overlay claddingPipe Cutting, pipeline cutting, orbital pipe cutterTIP TIG – SuperCut